Conduct Initial Status Survey In ISO 9001 Standards

Conduct Initial Status Survey In ISO 9001 Standards

ISO 9001 does not require duplication of effort or redundant system. The goal of ISO 9001 is to create a quality management system that conforms to the standard. This does not preclude incorporating, adapting, and adding onto quality programs already in place. So the next step in the implementation process is to compare the organization’s existing quality management system, if there is one — with the requirements of the standard (ISO 9001:2008).

For this purpose, an organization flow chart showing how information actually flows (not what should be done) from order placement by the customer to delivery to this customer should be drawn up. From this over-all flow chart, a flow chart of activities in each department should be prepared.

With the aid of the flow charts, a record of existing quality management system should be established. A significant number of written procedures may already be in place.

Unless they are very much out of date, these documents should not be discarded.

Rather, they should be incorporated into the new quality management system.

Documents requiring modification or elaboration should be identified and listed. This exercise is some times referred to as ” gap analysis”. During these review processes, wide consultation with executives and representatives of various unions and associations within the organization is required to enlist their active cooperation.

In the review process, documents should be collected, studied and registered for

further use, possibly after they have been revised. Before developing new quality

management system documentation, you need to consider with which quality

requirements or department you should start. The best is to select an area where

processes are fairly well organized, running effectively and functioning satisfactorily.

The basic approach is to determine and record how a process is currently carried out.

We can do this by identifying the people involved and obtaining information from them during individual interviews. Unfortunately, it often happens that different people will give different, contradicting versions of a process. Each one may refer to oral instructions that are not accurate or clear. This is why the facts are often not described correctly the first time around, and have to be revised several times.

Once it has been agreed how to describe the current process, this process has to be adapted, supplemented and implemented according to the requirements of the quality standard (ISO 9001:2008). This requires organizational arrangements, the drawing up of additional documents and possible removal of existing documentation (e.g. procedures, inspection/test plans, inspection/test instructions) and records (e.g. inspection/test reports, inspection/test certificates).

In introducing a quality management system, the emphasis is on the improvement of the existing processes or the re-organization of processes.

In general, the steps to follow are the following:

a. Ascertain and establish the following:

What is the present operation/process? What already exists?

b. Analyze the relevant sections of the quality standard – ISO 9001:2008:

What is actually required?

c. If necessary, supplement and change operational arrangements in accordance

with the standard, develop documents and records, and describe operations/

processes:

What is the desired operation/process?

The gap analysis can be done internally, if the knowledge level is there. Or a formal pre-assessment can be obtained from any one of a large number of ISO 9001 consulting, implementing, and registration firms.

ISO 9001 Standards – Quality Management Principles

ISO 9001 Standards – Quality Management Principles

A quality management principle is defined by ISO/TC 176 as a comprehensive and fundamental rule or belief, for leading and operating an organization, aimed at continually improving performance over the long term by focusing on customers while addressing the needs of all other interested parties. Eight principles have emerged as fundamental to the management of quality.

All the requirements of ISO 9001:2008 are related to one or more of these principles. These principles provide the reasons for the requirements and are thus very important. The quality management principles can be listed as below:

1. Customer focus
Organizations depend on their customers and therefore should understand current and future customer needs, meet customer requirements and strive to exceed customer expectations.
The customer focus principle is reflected in ISO 9001 Standards through the requirements addressing:
a. Communication with the customer
b. Care for customer property
c. The determination of customer needs and expectations
d. Appointment of a management representative
e. Management commitment

2. Leadership
Leaders establish unity of purpose and direction for the organization. They should create and maintain the internal environment in which people can become fully involved in achieving the organization’s objectives.
The leadership principle is reflected in ISO 9001 Standards through the requirements addressing:
a. The setting of objectives and policies
b. Planning
c. Internal communication
d. Creating an effective work environment

3. Involvement of people
People at all levels are the essence of an organization and their full involvement enables their abilities to be used for the organization’s benefit.
The involvement of people principle is reflected in ISO 9001 Standards through the requirements addressing:
a. Participation in design reviews
b. Defining objectives, responsibilities and authority
c. Creating an environment in which people are motivated
d. Internal communication
e. Identifying competence needs

4. Process approach
A desired result is achieved more efficiently when related resources and activities are managed as a process.
The process approach principle is reflected in ISO 9001 Standards through the requirements addressing:
a. The identity of processes
b. Defining process inputs and outputs
c. Providing the infrastructure, information and resources for processes to
function

5. System approach to management
This principle is expressed as follows:
Identifying, understanding and managing interrelated processes as a system contributes to the organization’s effectiveness and efficiency in achieving its objectives.
The system approach principle is reflected in ISO 9001 through the requirements addressing:
a. Establishing, implementing and maintaining the management system
b. Interconnection, interrelation and sequence of processes
c. The links between processes
d. Establishing measurement processes

6. Continual improvement
This principle is expressed as follows:
Continual improvement of the organization’s overall performance should be a permanent objective of the organization.
The continual improvement principle is reflected in ISO 9001 Standards through the requirements addressing:
a. Improvement processes
b. Identifying improvements
c. Reviewing documents and processes for opportunities for improvement

7. Factual approach to decision making
This principle is expressed as follows:
Effective decisions are based on the analysis of data and information.
The factual approach principle is reflected in ISO 9001 Standards through the requirements addressing:
a. Reviews, measurements and monitoring to obtain facts
b. Control of measuring devices
c. Analysis to obtain facts from information
d. Records for documenting the facts
e. Approvals based on facts

8. Mutually beneficial supplier relationships
This principle is expressed as follows:
An organization and its suppliers are interdependent and a mutually beneficial relationship enhances the ability of both to create value.
The mutually beneficial supplier relationships principle is reflected in ISO 9001 Standardsthrough the requirements addressing:
a. Control of suppliers
b. Evaluation of suppliers
c. Analysis and review of supplier data

ISO 9001 Standards – Retention Of Records

ISO 9001 Standards – Retention Of Records

It is important that records are not destroyed before their useful life is over.
There are several factors to consider when determining the retention time for records.
The duration of the contract – some records are only of value whilst the contract is in force.
The life of the product – access to the records will probably not be needed for some considerable time, possibly long after the contract has closed. On defence contracts the contractor has to keep records for up to 20 years and
for product liability purposes, in the worst-case situation (taking account of
appeals) you could be asked to produce records up to 17 years after you made the product.
The period between management system assessments – assessors may wish to see evidence that corrective actions from the last assessment were taken. If the period of assessment is three years and you dispose of the evidence after 2 years, you will have some difficulty in convincing the assessor that you corrected the deficiency.
You will also need to take account of the subcontractor records and ensure
adequate retention times are invoked in the contract.
Where the retention time is actually specified can present a problem. If you
specify it in a general procedure you are likely to want to prescribe a single
figure, say 5 years for all records. However, this may cause storage problems – it may be more appropriate therefore to specify the retention times in the procedures that describe the records. In this way you can be selective.
You will also need a means of determining when the retention time has
expired so that if necessary you can dispose of the records. The retention time doesn’t mean that you must dispose of them when the time expires – only that you must retain the records for at least that stated period. Not only will the records need to be dated but the files that contain the records need to be dated and if stored in an archive, the shelves or drawers also dated. It is for this reason that all documents should carry a date of origin and this requirement needs to be specified in the procedures that describe the records. If you can rely on the selection process a simple method is to store the records in bins or computer disks that carry the date of disposal.
While the ISO 9001 requirement applies only to records, you may also need to retain tools, jigs, fixtures, test software – in fact anything that is needed to repair or reproduce equipment in order to honour your long-term commitments.
Should the customer specify a retention period greater than what you
prescribe in your procedures, special provisions will need to be made and this is a potential area of risk. Customers may choose not to specify a particular time and require you to seek approval before destruction. Any contract that requires you to do something different creates a problem in conveying the requirements to those who are to implement them. The simple solution is to persuade your customer to accept your policy. You may not want to change your procedures for one contract. If you can’t change the contract, the only alternative is to issue special instructions. You may be better off storing the records in a special contract store away from the normal store or alternatively attach special labels to the files to alert the people looking after the archives.

Develop Quality Management System Documentation In ISO 9001 Standards

Develop Quality Management System Documentation In ISO 9001 Standards
Documentation is the most common area of non-conformance among organizations wishing to implement ISO 9000 quality management systems. As one company pointed out: “When we started our implementation, we found that documentation was inadequate. Even absent, in some areas. Take calibration. Obviously it’s necessary, and obviously we do it, but it wasn’t being documented. Another area was inspection and testing. We inspect and test practically every item that leaves here, but our documentation was inadequate”.
Documentation of the quality management system should include:
1. Documented statements of a quality policy and quality objectives,
2. A quality manual,
3. Documented procedures and records required by the standard ISO 9001:2008, and
4. Documents needed by the organization to ensure the effective planning, operation and control of its processes.

Quality documentation is generally prepared in the three levels indicated below that follows. Use ISO 10013:1995 for guidance in quality documentation.

Level A: Quality manual
States the scope of the quality management system, including exclusions and details of their justification; and describes the processes of the quality management system and their interaction. Generally gives an organization profile; presents the organizational relationships and responsibilities of persons whose work affects quality and outlines the main procedures. It may also describe organization’s quality policy and quality objectives.

Level B: Quality management system procedures
Describes the activities of individual departments, how quality is controlled in each department and the checks that are carried out.

Level C: Quality documents (forms, reports, work instructions, etc.)
1. Work instructions describe in detail how specific tasks are performed; include drawing standards, methods of tests, customer’s specifications, etc.
2. Presents forms to be used for recording observations, etc.

What is ISO 9001 Standard

What is ISO 9001 Standard?

Outsourced Processes In ISO 9001 Standards

Outsourced Processes In ISO 9001 Standards

One of the changes in ISO 9001:2008 is clarification of the role of outsourced processes in a quality management system. Guidance on ‘Outsourced processes’ helps clarify the intent and shows the linkage between Clause 4.2, where outsourced processes appear, and the purchasing controls in clause 7.4.
An outsourced process is a process that the organization needs for its quality management system and is performed by an external party. This party could be another company, a corporate service, another division, etc.
The organization needs to ensure the outsourced process is conducted in accordance with ISO 9001:2008 and other requirements of the quality management system. This brings in the purchasing controls of 7.4. The service may not be purchased in the traditional sense of a monetary transaction. The guidance document explains that the controls in clause 4.2 and 7.4 apply. For example, a “no charge” service from a corporate head office requires documentation of supplier selection and, most importantly, control.
The guidance document addresses two important cases and gives guidance on the appropriate level of control. The cases are:
• The organization has the competence and ability to carry out a process, but chooses to outsource it (for commercial or other reasons).
• The organization does not have the competence to carry out the process itself, and chooses to outsource it.

Demonstrating conformity with ISO 9001:2008

Demonstrating conformity with ISO 9001:2008

For organizations wishing to demonstrate conformity with the requirements of ISO 9001:2008, for the purposes of certification/registration, contractual, or other reasons, it is important to remember the need to provide evidence of the effective implementation of the QMS.
Organizations may be able to demonstrate conformity without the need for extensive documentation.
To claim conformity with ISO 9001:2008, the organization has to be able to provide objective evidence of the effectiveness of its processes and its quality management system. Clause 3.8.1 of ISO 9000:2005 defines “objective evidence” as “data supporting the existence or variety of something” and notes that “objective evidence may be obtained through observation, measurement, test, or other means.”
Objective evidence does not necessarily depend on the existence of documented procedures, records or other documents, except where specifically mentioned in ISO 9001:2008. In some cases, (for example, in clause 7.1(d)
Planning of product realization, and clause 8.2.4

Monitoring and measurement of product), it is up to the organization to determine what records are necessary in order to provide this objective evidence.
Where the organization has no specific internal procedure for a particular activity, and this is not required by the standard, (for example, clause 5.6 Management Review), it is acceptable for this activity to be conducted using as a basis the relevant clause of ISO 9001:2008. In these situations, both internal and external audits may use the text of ISO 9001:2008 for conformity assessment purposes.